Danh mục
Dòng MC2
Amplifiers with DSP
Amplifiers + Accessories
HSE (Hi-Fi Signature Exclusive)
I-SERIES (INSTALL)
S-SERIES (SIGNATURE)
T-SERIES (TOUGH)
MX Series – DSP Enabled Console Switching Systems
The MX Series has been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. The MX36 handles 36 inputs in 2U across analogue, AES and Dante networks, these are arranged in sets of four (to typically support Left-Right-Front Fill and Sub feeds from an individual console). The MX24s offer the same 4 bus switching abilities, but scale things back to two sets of two sources, either Analogue+Dante (MX24D) or Analogue+AES (MX24A).
Overview
When you need to ensure that the show goes on, no matter what happens, you need backups of backups. You need a way to automatically switch between them if the primary signal path drops out. You need the ability to work with any sample rate on any AES input. To perform this across not just stereo pairs, but four channels simultaneously (L/R/FF/Sub).
No need for control software, no PC* and no way for this to be tampered with remotely. You don’t want to be trusting this to an inferior sub-mixer or an over-specified, over-complex processor – get the right tool for the job.
The MX36 Console Switching System is the solution. It handles four simultaneous inputs across three source types (analogue, AES and Dante – 36 individual inputs) and even when you’re not monitoring a source it will be. It will be checking the signal integrity and will auto-select the highest priority source seamlessly if anything fails.
The MX34 Console switching system, launched September 2022, offer all the features of the MX36 but without Dante inputs / outputs.
The MX24s offer the same 4 bus switching abilities, but scale things back to two sets of two sources, either Analogue+Dante (MX24D) or Analogue+AES (MX24A).
*except for firmware updates and optional remote configuration
All you have to do is press A, B or C^ to choose what’s routed to the four outputs (again all available in analogue, AES and Dante flavours simultaneously^ with the option for external sync on the AES outputs^).
Feed in a stereo source direct to the MX for background music and a mic for announcements. Plug in some headphones and monitor every individual feed from any source, plus check what’s on the outputs and even verify your redundancy failovers beforehand.
Once you’re happy, lock it all down and walk away, safe in the knowledge that the MX will keep the music playing, with dual redundant power supplies^, and XTA’s 25+ years of DSP knowledge ensuring your audio is treated with white gloves through the best audio conversion.
^MX36 only, MX36 & MX34 have ext AES sync, MX34/MX24A AES/Analog, MX24D Analog/ Dante.
Specifications
Analogue Inputs:
Consoles A/B/C
3 x 4, 24-bit, 96kHz conversion; max input level +21.5dBu
MX24
Analogue Inputs:
Consoles A/B
3 x 4, 24-bit, 96kHz conversion; max input level +21.5dBu
MX36 / MX34
AES Inputs:
3 x (2+2), with individual pair sample rate conversion
MX36 Dante Inputs:
3 x 4, global sample rate (48k/96k),
MX24A
AES Inputs:
2 x (2+2), with individual pair sample rate conversion
MX24D
Dante Inputs:
2 x 4, global sample rate (48k/96k)
Background Music (Stereo Line)
Stereo unbalanced 3.5mm front panel jack, 2 x rear panel balanced XLR (in parallel)
24-bit, 96kHz conversion; variable gain -INF to +20dB; max input level +21.5dBu
Microphone
Mono balanced front panel XLR, rear balanced XLR (in parallel)
24-bit, 96kHz conversion; variable gain -50dB to +50dB; 48V phantom power
MX36/MX24
Analogue Outputs:
4 x balanced XLR, max output +21.5dBu (may be internally scaled to +8dBu or +12dBu for upstream system compatibility)
MX36/ MX34 /MX24A
AES Outputs:
2 x 2 , 96kHz (default) internal word clock (48K selectable), or sync to external BNC word clock
MX36/MX24D
Dante Outputs:
1 x 4, global sample rate set by Dante network (48k/96k)
System:
3 pin IEC (X2 with redundant PSU in use – MX36 only)
Power 60VAC – 240VAC
Consumption < 50 watts
Weight 5.1kg. Net (6.3kg Shipping)
Size (2U) : 88 x 482 x 312mm) excluding connectors
Sản phẩm tương tự
-
DPA Series
DPA Series – Digital Processing Amplifiers
Đọc tiếpDPA40 (4 x 1400W into 2.7R) | DPA80 (4 x 2200W into 2.7R) | DPA100(4 x 3700W into 2.7R)
With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection. Now shipping with 2000+ preset library in AudioCore: Amped Edition! -
5 Series
5 Series – Dynamic Audio Management
Đọc tiếpMuch more than a sum of its parts, the 5 Series dynamic management takes the features of the 4 Series products and adds the equivalent of four D2 dynamic equalisers across the inputs and a channel of C2 compression on each output, along with a new matrix mixing mode.
With two units available (DP548 – 4 inputs/8 outputs, and DP544 – 4 inputs/4 outputs), all the original features and sound quality of the 4 Series are preserved and expanded upon using a newer DSP platform, and with some never before seen ground breaking features in AudioCore, it all makes for a new dynamic combination…
-
Amplifiers + Accessories
Delta20 – Delta-Series Amplifiers
Đọc tiếpDelta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante (optional), which is then converted using 24 bit 96kHz DACs.
-
S-SERIES (SIGNATURE)
S800 – S-Series
Đọc tiếpSIGNATURE/REFERENCE CLASS AB POWER AMPLIFIERS FOR STUDIO/AUDIOPHILE
Designed for use in the best studio monitoring environments, but equally at home in any application where transparency and “no compromise“ performance are the focus, the S Series deliver the sound quality and reliability expected from MC².
VỀ MC2AUDIO
MC2 Audio phát triển và sản xuất các bộ khuếch đại chất lượng cao cho các ứng dụng âm thanh chuyên nghiệp.
XEM THÊM
TIN BÀI
Glade, Acoustic và West Holts nằm trong số một số sân khấu được hưởng lợi từ công nghệ XTA và MC²… Như thường lệ, phiên bản năm nay của Glastonbury đã chứng minh lý do tại sao nó vẫn là một trong những lễ hội âm nhạc được yêu thích nhất thế giới. Những nghệ …
Sensible Music Group nâng cấp với bộ khuếch đại MC² Delta Series… Trong hơn ba mươi lăm năm, Sensible Music Group đã cung cấp dịch vụ thu âm, tập dượt và sản xuất cho ngành công nghiệp âm nhạc tại các phòng thu ở London. Các dịch vụ phối nhạc, master và phát trực tuyến cũng …
Đánh giá
Chưa có đánh giá nào.