Danh mục
DS8000/D Audio Distribution System
The DS8000 is a 2U, 8 input to 32 output mic/line distribution system with 16 transformer balanced isolated outputs, and 16 electronically balanced outputs fitted as standard. Input transformers and replacement of the electronically balanced outputs with transformer balanced outputs are available as options.
Featuring all new microphone pre-amps designed by Gottelier award winning Alex Cooper, the DS8000 offers many new facilities including a dual redundant power supply*, simple Outside Broadcast “one to many” split switching and 48V “safe“ functions to prevent tampering.
Subtle panel lighting for dark under-stage environments and the option of adding an ADC card for integration into digital networks, plus bespoke new output transformers all combine to produce a package that enhances its predecessor’s reputation as a flexible, rugged high quality distribution system.
Rugged 2U steel casing with recessed control panel area to avoid damage and accidental adjustments.
Illumination of control panel area for low light conditions.
DC power supply link capability – enables safe fail over mode for paired units in the event of a power loss to either unit.
New design discrete mic preamps with exceptional noise and CMR for incredible performance, even with long cables (typically 120dB at 1kHz). Improved gain range now switchable in 6dB steps from -6dB up to +42dB.
Individual channel 4 segment LED metering with attendant solo and 48V indicators.
Remote control of phantom power on inputs via sensing on FOH and MON outputs.
Individual phantom power on all channels, with “safe” switching for FOH, MON and front panel.
Ground lift circuit switches to prevent hum – separate MON and FOH control.
“O/B Split” modes switchable to feed channel 1’s input to first 16 outputs, or channel 5’s to last 16 outputs.
Solo listen with high power phones amp and external bus to allow other units to be monitored without having to move headphones jack.
DS8000D – go digital
Add even more flexibility with 2 x 8 AES outputs, with wordclock sync and master clock out.
Featuring reassuring XTA quality ADCs operating at 48, 96 or 192k, this is all available in addtiion to the already comprehensive analogue output makeup.
Specifications
Inputs
Electronic
Max input level: +26dBu
Differential Impedance 10k
100Hz CMRR @0dB gain 85dB typ.
100Hz CMRR @30dB gain 120dB typ.
1kHz CMRR @0dB gain 85dB typ.
1kHz CMRR @30dB gain 120dB typ.
Inputs Transformer Isolated
As above except:
Max broad spectrum level: +26dBu
Max LF level: +16dBu (30Hz)
Differential Impedance 5k
Isolation 2.5kV
Outputs Electronic
Max output level: +20dBu (600R)
Diff. Impedance less than 50ohms
Outputs Transformer Isolated
Max output level: +10dBu (600R)
Nominal level: -10dB
Diff. Impedance less than 150ohms
Isolation 2.5kV
System
Freq. Response 22-22k +0/-0.5dB
XFMR Option Freq. Response 22-22k +0/-1.5dB
EIN (0dB gain, 22-22k) less than -101dBu
EIN (30dB gain, 22-22k) less than -124dBu
Power 90-240VAC, nominal less than 30W
Weight (no options) less than 6kg
Architect Spec’s
The audio distribution system shall be of an active design providing 8 independent channels in a standard 2 unit, 19″ rackmount enclosure. Each channel shall provide two outputs that are actively balanced, and accessible via rear panel XLR connectors, and two that are transformer isolated and accessible via front panel XLR connectors.
The input shall accommodate line level signals of up to +26dBu without clipping. Each channel shall provide switched gain adjustment in 9 steps via a front panel control, 48V phantom power shall be selectable via a front panel switch, 4 segment LED metering and ‘Solo’ facility via a front panel switch. Phantom power shall be remotely enabled when 48V power is detected on the ‘Mon’ or ‘FOH’ XLR connectors on the rear panel.The device shall include a headphone ‘Solo’ facility via a 1 / 4 inch phone connector with associated level control.
Remote phantom power and front panel phantom power switching may be disabled via rear panel ‘Safe’ switches. Ground lift switches shall disconnect the internal ground connection in two banks (inputs 1-4, 5-8). An ‘OB Split’ function shall feed input 1 to outputs 1-4 or input 5 to outputs 5-8 via two rear panel switches with front panel indication.
The unit shall have the option to have AES digital outputs fitted in addition to the standard analogue outputs. The device shall provide facility to link the ‘Listen’ busses together when using multiple devices.
The device shall be powered from an internal power supply, which will operate from an 90-240V 50/60Hz power supply. A single unit shall be capable of providing power to another connected unit via a 5 pin XLR power link cable, and this switchover shall be automatic with front panel indcation of the power supply state.
The audio distribution system shall be the XTA Electronics DS8000.
Accessories
Here are the related accessories for this product – please contact your local distributor for more information
CNH-D8000 Buddy-link supply cable: Connect two units together to provide supply failsafe changeover
CNH-DB25DB25 AES breakout extension: 25pin Dsub to 25pin Dsub
CNH-DB254MXLR AES breakout cable: (4 AES output only connected – one set of 8 channels)
CNH-DB258MXLR AES breakout cable: (4 x 2 AES output only connected – two sets of 8 channels)
ITX-8000: Input transformer (x8) balancing kit (factory fit only)
OTX-8000: Output transformer (x8) balancing kit (factory fit only)
Sản phẩm tương tự
-
Amplifiers with DSP
Delta DSP40
Đọc tiếpPowerful processing features, such as FIR filtering, dynamic eq, and Dante networking (optional), work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.
Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored, wirelessly. USB, direct Ethernet and RS485 control options plus configurable GPIO offer unparalleled flexibility.
All MC² Audio products are covered by a 5 year warranty.
-
4 Series
4 Series – Audio Management
Đọc tiếpBased on the already successful DP428 platform, the new 4 Series considerably increase sound company choice. The DP428 takes on the name DP448 to complete the family and share the common technology. The five models in the series are: DP448 – 4 In 8 Out, DP446 – 4 In 6 Out, DP444 – 4 In 4 Out, DP426 – 2 In 6 Out, and DP424 – 2 In 4 Out.
As the demands placed on professional audio systems continue to steadily increase, so must the technology be advanced to maintain the expected quality and useability. Based on a completely new processing platform, running at a native sample rate of 96kHz, the 4 Series set a new standard in terms of performance, flexibility, and ease of use. -
S-SERIES (SIGNATURE)
S1400 – S-Series
Đọc tiếpSIGNATURE/REFERENCE CLASS AB POWER AMPLIFIERS FOR STUDIO/AUDIOPHILE
Designed for use in the best studio monitoring environments, but equally at home in any application where transparency and “no compromise“ performance are the focus, the S Series deliver the sound quality and reliability expected from MC².
DANH MỤC
VỀ MC2AUDIO
MC2 Audio phát triển và sản xuất các bộ khuếch đại chất lượng cao cho các ứng dụng âm thanh chuyên nghiệp.
XEM THÊMTIN BÀI
Glade, Acoustic và West Holts nằm trong số một số sân khấu được hưởng lợi từ công nghệ XTA và MC²… Như thường lệ, phiên bản năm nay của Glastonbury đã chứng minh lý do tại sao nó vẫn là một trong những lễ hội âm nhạc được yêu thích nhất thế giới. Những nghệ …
Sensible Music Group nâng cấp với bộ khuếch đại MC² Delta Series… Trong hơn ba mươi lăm năm, Sensible Music Group đã cung cấp dịch vụ thu âm, tập dượt và sản xuất cho ngành công nghiệp âm nhạc tại các phòng thu ở London. Các dịch vụ phối nhạc, master và phát trực tuyến cũng …
Đánh giá
Chưa có đánh giá nào.