Danh mục
Dòng MC2
Amplifiers with DSP
Amplifiers + Accessories
HSE (Hi-Fi Signature Exclusive)
I-SERIES (INSTALL)
S-SERIES (SIGNATURE)
T-SERIES (TOUGH)
Delta100 – Delta-Series Amplifiers
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante (optional), which is then converted using 24 bit 96kHz DACs.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante (optional), which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
All MC² Audio products are covered by a 2 year warranty.
Specifications
| Number of channels | 4 |
| Output Power: (per channel)* | |
| 8 ohms | 1400W |
| 4 ohms | 2700W |
| 2.7 ohms | 3700W |
| 2 ohms | 3500W |
| Output Power: (bridged) | |
| 8 ohms | 5400W |
| 4 ohms | 7000W |
| THD%: (@1dB below max output) | |
| @ 1kHz | < 0.08% |
| 20Hz to 20kHz | < 0.1% |
| Gain / Sensitivity: | |
| Gain | 26/32dB |
| Sensitivity (for max power) | 10.7dBu |
| Frequency Response: | 20Hz to 20kHz (+ 0/- 0.5dB) |
| Power Consumption: (< 5W in standby) | |
| Nominal @ 240v into 4 ohms | 7.5A |
| Nominal @ 120v into 4 ohms | 15.5A |
| Dimensions: (2U) (mm) | |
| Amplifier | 88(h) x 482(w) x 428(d) |
| Single Box (UK shipping) | 230 x 580 x 560 |
| Double Box (outside UK) | 250 x 610 x 600 |
| Weight: | |
| Amplifier | 10.8kg |
| Boxed (shipping weight) | 12.3kg |
*for 100V line drive specifications, please read this document
Downloads
Sản phẩm tương tự
-
5 Series
5 Series – Dynamic Audio Management
Đọc tiếpMuch more than a sum of its parts, the 5 Series dynamic management takes the features of the 4 Series products and adds the equivalent of four D2 dynamic equalisers across the inputs and a channel of C2 compression on each output, along with a new matrix mixing mode.
With two units available (DP548 – 4 inputs/8 outputs, and DP544 – 4 inputs/4 outputs), all the original features and sound quality of the 4 Series are preserved and expanded upon using a newer DSP platform, and with some never before seen ground breaking features in AudioCore, it all makes for a new dynamic combination…
-
MX Series
MX Series – DSP Enabled Console Switching Systems
Đọc tiếpThe MX Series has been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. The MX36 handles 36 inputs in 2U across analogue, AES and Dante networks, these are arranged in sets of four (to typically support Left-Right-Front Fill and Sub feeds from an individual console). The MX24s offer the same 4 bus switching abilities, but scale things back to two sets of two sources, either Analogue+Dante (MX24D) or Analogue+AES (MX24A).
-
Amplifiers + Accessories
Delta20 – Delta-Series Amplifiers
Đọc tiếpDelta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante (optional), which is then converted using 24 bit 96kHz DACs.
-
Amplifiers + Accessories
Delta80 – Delta-Series Amplifiers
Đọc tiếpDelta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante (optional), which is then converted using 24 bit 96kHz DACs.
VỀ MC2AUDIO
MC2 Audio phát triển và sản xuất các bộ khuếch đại chất lượng cao cho các ứng dụng âm thanh chuyên nghiệp.
XEM THÊM
TIN BÀI
Glade, Acoustic và West Holts nằm trong số một số sân khấu được hưởng lợi từ công nghệ XTA và MC²… Như thường lệ, phiên bản năm nay của Glastonbury đã chứng minh lý do tại sao nó vẫn là một trong những lễ hội âm nhạc được yêu thích nhất thế giới. Những nghệ …
Sensible Music Group nâng cấp với bộ khuếch đại MC² Delta Series… Trong hơn ba mươi lăm năm, Sensible Music Group đã cung cấp dịch vụ thu âm, tập dượt và sản xuất cho ngành công nghiệp âm nhạc tại các phòng thu ở London. Các dịch vụ phối nhạc, master và phát trực tuyến cũng …
Đánh giá
Chưa có đánh giá nào.